Unlike other rack systems, AIRAX suspends the board so it doesn’t lean against the wall, supporting it, so that it looks like it is floating off the wall. The fixing points of the rack, once secured to the wall, are hidden out of sight.
The racks are designed to be low profile, so if your board has fins that can’t be removed, the bottom of the board will need to face out, towards the room, not towards the wall.
Designed with various screw holes so you can incrementally adjust each rack up or down. This helps to get the board horizontal or to suit a different board or orientation.
The keyholes allow for quick adjustment up and down, while the single hole can be used to secure it into position.
One screw will hold the board if it is anchored well. Using one screw also allows the racks to pivot to match the angle of the rails. Use 2 screws per rack if you want to fix the racks at an angle, and for greater stability.
Ensure wall racks are rated for the weight of the board.
For thicker boards, just check your board is less than 56mm thick at the bracket position.
This product is a registered design, design number: 202116405
